Technical Support

Before installation

  • Make sure you have read and accepted the terms of use
  • Make sure that your vehicle’s fuel injector connectors are compatible with the content of the product package
  • The conversion kit is only compatible with gasoline powered vehicles
  • The conversion kit is only compatible with high impedance fuel injectors - unless otherwise specified
  • The conversion kit is not compatible with direct injection engines (FSI, TSI, GDI, etc.)
  • Verify adequate flow rate of the fuel system (E85 requires c. 30% higher flow rate)
  • Vehicle needs to be in normal operating condition
  • The vehicle's oxygen sensors must operate normally (passed smog inspection)
  • The conversion kit is only compatible with 12 V electrical systems
  • Temperature in installation location should be above 50 °F. Plastic components may break

Next is preparation