Technical Support

Finishing installation

  • Start the engine
  • The engine should be running normally. However, the first startup after the installation may be a bit longer if the ethanol sensor is installed in the pressure line and fuel line is drained empty
  • When you have started the engine, observe the installed fuel line connectors and fuel hose. Even a small leak could cause a fire hazard
  • If vehicle won’t start, check the ground wire connection
  • If vehicle runs badly, check the polarity of fuel injector connectors and that the connectors are connected properly
  • You can monitor the control unit with the mobile application
  • Installation is ready and you can now refuel gasoline, E85 or any mixture of these in your vehicle