Support

Installation process from the early stages up until the finishing touch.

Installation guide & videos

Are you looking to install your eFlexFuel product? Our 10-part series on YouTube details each step of the process, from preparation to wiring to the final steps.

  • Users with experience in simple automotive repairs and installations should be able to install eFlexFuel products
  • Our product comes with an installation guide as well as access to our YouTube series
  • If you have any questions or concerns during installation, our technical support team is here to help

Main installation steps

Installation usually takes about 1-2 hours.

  • All the electrical and fuel line connectors you need are provided.
  • Install ethanol sensor to fuel line.
  • Connect wiring harness between fuel injectors and ECM.
  • Finalize the installation.

Installation videos

Links will redirect to youtube.

  1. Before Installation
  2. Preparation
  3. Disconnecting fuel line
  4. Assembling new fuel line
  5. Connecting assembled fuel line
  6. Polarity of male connectors
  7. Installing male connectors
  8. Installing wiring harness
  9. Installing ground wire
  10. Finishing installation

Technical support

Any questions? Contact us [email protected].